Direction for use COMPONENT Claw Driver : Used by turning counterclockwise to the broken surface of the abutment screw. Screw Drill : Drilling (1500~2000RPM) counterclockwise through the screw drill where the screw guide is installed when the broken screw is not removed even with the claw driver. Tap Driver : Used by turning counterclockwise after drilling to the broker abutment screw. Screw Guide : It aims at protecting the thread in the implant with the fixing to the implant. Type : 8° Morse Taper, Submerged 2.5 Hex, TSV 3.7/4.1, Replace RP Guide Wrench : Used for fixing the screw guide to the implant. Used in combination as it is seperately installed to the bottom of the mini kit. Related ProductIMPLANT & SCREW REMOVER KIT(S)10000 Direction for use COMPONENT Trephine bur : Ø4.5, Ø5.0, Ø5.5, Ø6.0 – Used after installation to the engine handpiece when removing the implant from the mouth. Claw Driver : Used by turning counterclockwise to the broken surface of the abutment screw. Screw Drill : Drilling (1500~2000RPM) counterclockwise through the screw drill where the screw guide is installed when the broken not removed even with the claw driver. Tap Driver : Used by turning counterclockwise after drilling to the broker abutment screw. 0.7 Slot Driver : Used by turning […]