Direction for use COMPONENT Trephine bur : Ø4.5, Ø5.0, Ø5.5, Ø6.0 – Used after installation to the engine handpiece when removing the implant from the mouth. Claw Driver : Used by turning counterclockwise to the broken surface of the abutment screw. Screw Drill : Drilling (1500~2000RPM) counterclockwise through the screw drill where the screw guide is installed when the broken not removed even with the claw driver. Tap Driver : Used by turning counterclockwise after drilling to the broker abutment screw. 0.7 Slot Driver : Used by turning counterclockwise to the broken abutment screw surface after drilling. Screw Guide : It aims at protecting the thread in the implant with the fixing to the implant. type : Active RP, External 2.7 Hex, 8° Morse Taper, Submerged 2.5 Hex, TSV 3.7/4.1, Camlog Tube-in-Tube Implant Remover : 3EA – Used for removing the implant by connecting to the ratchet, putting in the implant and turning counterclockwise. Hand / Strauman Adapter : Used for switching the driver for the handpiece to the hand or connection for the use of Strauman ratchet wrench. Driver Hand Adapter : Used for switching the driver for the handpiece to the hand or connection for the use of Strauman ratchet wrench. Implant Forcep : Used first for attempting the removal of an implant as the […]