Feature
- Advantage : Inlay and onlay can be easily removed.
- Inlay and onlay can be removed with the simple drilling.
- Inlay and onlay can be removed with one kit.
- Any inlay and onlay can be removed due to its perfect components.
- Practitioners can freely select as there are two
- remover methods with either a ratchet or handpiece.
Direction for use
COMPONENT
- Metal Cutting Bur Ø1.0, Ø1.2
- Ratchet Remover Ø1.6(S), Ø1.6, Ø1.8
- Handpiece Remover Ø1.6, Ø1.8
- Ratchet
HOW TO USE
- Form a hold to the section where removal will be carried out.
1) Use the metal cutting bur Ø1.0 or Ø1.2 included in the kit.
– Be careful that the remover connection cannot be done if the hold becomes too large.
– Be careful that you do not go over the cement line. (Make observation not to go over the cement line using a mirror)
– Keep the angle of prosthetics and bur 90°. - Carry out remover using the ratchet or hand.
1) Turn the remover with your hand, so that it can be connected around the hole.
2) Here, select the one-size larger remover in its dimension, if the remover is not connected but spins with no traction.
3) Turn clockwise using a dedicated ratchet, handpiece, handpiece driver, etc.
(It is recommended that RPM should be set to 30~50RPM when removal is carried out with the handpiece.)
4) You can see the removing progress while observing the removal process. Shake and remove the targeted object thereafter.
※ Cautions in Use 1. Use the kit in consideration of the direction for prosthetics. 2.Ensure your observation / caution, so that you do not go over the cement line during the remover practice.
