BONE EXPANDER KIT

Feature

  • As the thread design of the expander is reserved, the bone can be surely widened.
  • The selection of ratchet can be diversified as the adapter compatible with Straumann Wrench is inserted.
  • One kit enables both the use of implant engine and manual use.
  • The Reverse Threaded.
  • Bone Trimmer.
  • Color Division.
  • Compact Size.

image 045

 


 

Direction for use

 

COMPONENT

image 015

  1. Crest Trimmer : Used for trimming and flattening the narrow and thin bone in crest width.
  2. Saw Ø10 : Used for sawing the bone. (Thickness 0.3mm, Diameter 9.8mm)
  3. Drill : Used for drilling an implanting hole to push the expander.
  4. Expander : Used for expanding the bone sequentially to insert the implant into the narrow area in crest width.
  5. Ratchet : Used for tightening or loosening the expander manually during surgery.
  6. Ratchet Adapter : Used for connection to the ratchet for the extension of the expander.
  7. Handpiece Adapter : When the implant engine is used, it is used with the insertion of the expander after it is connected to the handpiece adapter. [Recommended RPM : 30~50RPM]
  8. Hand/Strauman Adapter : Used by turning the expander with hands or used with the connection to Strauman Ratchet Wrench.

* THE BONE EXPANDER has the basic type consisting of the basic expander, and the master type where 2 premium tools are added.

 

 

Related Product

  • 10000
    OSBC Kit A, B Oneself Bone Collector Kit     Direction for use   COMPONENT Collector Drill : Ø4, Ø5, Ø6, Ø7 - Used to collect the bone inside the drill while drilling. [Recommended RPM 500 – 1000 RPM] Stopper : Ø4, Ø5, Ø6, Ø7 - It consists of the silicone spring and peak type.      
  • 10000
        Direction for use   COMPONENT Trephine bur : Ø4.5, Ø5.0, Ø5.5, Ø6.0 - Used after installation to the engine handpiece when removing the implant from the mouth. Claw Driver : Used by turning counterclockwise to the broken surface of the abutment screw. Screw Drill : Drilling (1500~2000RPM) counterclockwise through the screw drill where the screw guide is installed when the broken not removed even with the claw driver. Tap Driver : Used by turning counterclockwise after drilling to the broker abutment screw. 0.7 Slot Driver : Used by turning counterclockwise to the broken abutment screw surface after drilling. Screw Guide : It aims at protecting the thread in the implant with the fixing to the implant. type :…
  • 10000
        Direction for use   COMPONENT Trephine : 3.8/4.5, 4.3/5.0, 4.8/5.5, 5.3/6.0 Used with connection to the engine handpiece when the implant is removed from the mouth. Implant Remover : Used for manual removal by turning conterclockwise with connection to the ratchet. [Small, Medium, Large] Hand / Strauman Adapter : Used for fixing the remover with hands in the implant or for connecting when Strauman Ratchet Wrench is used. Implant Forcep : Forceps dedicated to the implant used for removing the implant from the mouth.      
No comments
LIST

    댓글은 닫혔습니다.

위로이동