BONE COLLECTOR

OSBC Kit A, B Oneself Bone Collector Kit

Feature

  • It is possible to collect the autologous bones safely and quickly by minimizing the loss of bone during drilling.
  • Bone heating generated during the procedure is lowered using special materials.
  • The stopper uses the silicon spring for the first time in the world, increasing the number of uses more than 50% compared to that of the existing products.
  • Reasonable and economical depending on the increase and decrease in the number of uses.
  • The operator can freely select the stopper depending on the operator’s method and preference.
  • The stopper can be selected from the silicone spring or peak material.

image 055

 


 

Direction for use

 

COMPONENT

  1. Collector Drill : Ø4, Ø5, Ø6, Ø7
    – Used to collect the bone inside the drill while drilling.
    [Recommended RPM 500 – 1000 RPM]
  2. Stopper : Ø4, Ø5, Ø6, Ø7
    – It consists of the silicone spring and peak type.

 

 

 

Related Product

  • 10000
        Direction for use   COMPONENT Crest Trimmer : Used for trimming and flattening the narrow and thin bone in crest width. Saw Ø10 : Used for sawing the bone. (Thickness 0.3mm, Diameter 9.8mm) Drill : Used for drilling an implanting hole to push the expander. Expander : Used for expanding the bone sequentially to insert the implant into the narrow area in crest width. Ratchet : Used for tightening or loosening the expander manually during surgery. Ratchet Adapter : Used for connection to the ratchet for the extension of the expander. Handpiece Adapter : When the implant engine is used, it is used with the insertion of the expander after it is connected to the handpiece adapter. [Recommended…
No comments
LIST

    댓글은 닫혔습니다.

위로이동